Repairs to uPVC Windows
uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like timber and aluminum.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. window repairs near me is essential to ensure that your windows are in good condition.
Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.
If you're planning to try to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any fragments of glass fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.
It's a great idea to seal the gap after the glass is removed. This will stop drafts and water from entering your property until a professional is able to fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the distance between the window and the door is significant, you may want to use an alarm system that includes windows. This will give you the best of both.
2. Sagging
Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, with time, they can suffer from a variety of issues like sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. It is crucial to act as soon as you notice your uPVC windows are falling down.
Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to unblock the windows to get at the frame. After that, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in place.
If you aren't able to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are watertight and safe from drafts.
uPVC handles could also loosen. Often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. You'll first need to close the window and perform a test fitting. The corners of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into its original position.
3. Water Leaks
It is crucial to act if you awake each day to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the problem the caulking that was used up might need to be removed before a new layer of caulk is applied. When it is time to uPVC repair, it is important to avoid over-caulking. This can make your window more difficult to clean and reduce its energy efficiency.
It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.
Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.
If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges could be at fault for the reason that your uPVC window is difficult to open or if it blows open with the breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.
Like any mechanical part hinges are prone to wear out over time. Changing a window hinge is essentially a simple procedure, but it is simpler when you have a person to help hold the frame in place.
Check that the uPVC hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.
Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by inadequate installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to provide assistance.
It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by different factors. The hinges can also be misaligned due to wear, creating an opening between the frame and sash. These can be easily fixed by giving them a good clean, but when they're beyond repair, it could be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge of the window, can be misaligned. Again, it is feasible to give them a good clean, but in certain cases, it may be necessary to have these replaced.
These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the possibility of draughts.
Lastly, one of the most effective ways to cut down on drafts is to use a draught excluder, these are typically fabric tubes that are filled with some kind of filler. They can be positioned on top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!
With a little maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach an point at which it is more cost-effective to replace them rather than fix them. So, if you are experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as possible.